Stabilizer / Rocker Legs

Stabilizers / Rocker Legs

Premium Aluminum Stabilizers / Rocker Leg

Are you looking to improve your vibratory equipment performance? Replacing worn stabilizer legs can be a very effective way of increasing the efficiency of a vibratory unit. Doing so will decrease operating costs and provide you with a positive impact on available uptime and reduce the unexpected downtime of your equipment.

General Kinematics Premium Aluminum Stabilizers : Rocker LegGeneral Kinematics premium aluminum stabilizer legs outlast and outperform other stabilizers. The natural properties of aluminum rapidly conduct heat away from the leg bushing, allowing aluminum legs to run 20 or more degrees cooler than steel fabricated or cast legs. This is important, as the reduced temperature of the aluminum leg is proven to significantly increase the life of the bushing over those found in steel legs. This increased bushing life means more uptime, longer component life, and reduction in repair costs which puts more money to your bottom line. Should the bushings need replacement, GK stabilizer bushings are easily replaceable, extending life and reducing overall maintenance costs.

GK now carries vibratory stabilizer / rocker legs for other brands of vibratory equipment, which are listed in the charts below. Should you have a stabilizer not listed, no problem! Contact us TODAY and we will create a stabilizer for your application that offers improved performance and a longer service life.


GK Part #



10-01-39-A 11 1/2″ 3 1/4″  10-01-39-A
10-01-47-A 7 1/2″ 2 1/4″  10-01-47-A
10-01-3012-A 14″ 6 1/2″  10-01-3012-A
10-01-3002-A 13″ 8″  10-01-3002-A
10-01-42-A 14″ 3 1/4″  10-01-42-A
Call our expert team today!



Part Number
GK Part Number Center Length Width
Carrier 110402 CP10-01-51-A 9 1/2″ 3 1/4″ CP10-01-51-A
Carrier 110406 CP10-01-53-A 15 3/4″ 3 1/4″  CP-10-01-53-A
Carrier 110407 CP10-01-55-A 15 3/4″ 5 1/2″  CP10-01-55-A
Carrier 110401 CP10-01-57-A 9 1/2″ 5 1/2″  CP10-01-57-A
Carrier 110412 CP10-01-59-A 18 3/4″ 5 1/2″  CP10-01-59-A
CDC-2052 / DS-1400 10-01-50-A (ductile) 14″ 3 1/4″ 10-01-42-A
Extreme-Duty Ductile Stabilizers / Rocker Legs

GK’s patented ductile stabilizers / rocker legs use the same great design concept as our premium aluminum stabilizer / rocker legs, but are cast in abrasion resistant ductile iron. General Kinematics all new patent pending severe-duty ductile stabilizer legs are the strongest legs available on the market. Using proven I-Beam construction, GK ductile legs eliminate vertical and horizontal deflection found in other brands of stabilizers for maximum strength in the most demanding applications.

When to change to steel stabilizers:

Do you have an application where your machine is exposed to sand filled pits, chemicals, and other environmental conditions that can occasionally present a challenge to non-ferrous alloys such as aluminum? For those rare cases where this occurs, GK now offers our all new ductile iron stabilizers / rocker legs for GK or other brands of vibratory equipment. GK Parts specialists will work with you to provide the optimum leg design and the engineering information to help you install and retune your machine to ensure it continues to operate according to the original design


What to know before you change to steel stabilizers:

Due to increased weight, GK ductile iron stabilizers are recommended for only the most difficult environments and running conditions. When switching to ductile stabilizers, please consult General Kinematics service department for information on re-tuning and re-calibration of your unit, as these legs will alter the performance characteristics of your machine. For all other applications, please refer to our aluminum stabilizer legs.

GK Ductile Stabilizers / Rocker Legs:

  • Abrasion resistant
  • Reduce Operating Costs
  • Reduce Downtime
  • Use replaceable bushings
  • Maintain factory machine warranty
Stabilizer / Rocker Leg Bushing Replacement Tool Kit

General Kinematics’ Stabilizer / Rocker Leg Bushing Replacement Tool Kits allow for easy removal of worn bushings and replacement of new rocker leg bushings.Stabilizer : Rocker Leg Bushing Replacement Tool Kit
Tool Kits are available in the following bushing diameters:

  • 1-3/4″ OD – CP10-01-03-T-A-KIT
  • 2-3/8″ OD – CP10-01-01-T-A-KIT
  • 3″ OD – CP10-01-02-T-A-KIT


Each Tool Kit contains one tool for removal and another tool for installation of rocker leg bushings. Made to the GK’s high standards, these Tool Kits will be used by your maintenance department for years to come. Shop now!